Best Snowboard Boots for Wide Feet

best snowvboard boots for wide feet

Snowboarders with large, wide feet have trouble finding wide width snowboarding boots. I crafted best snowboard boots for wide feet to help snowboard riders find what they need fast and pain-free. Some snowboard boot brands offer wide fitting choices, and in these wide width snowboard boots reviews, I pinpoint 5 that accommodate beefy feet.

*Affiliate Links Disclosure

This website participates in the Amazon Associates program. And as an Amazon Associate, I earn from qualifying purchases. However, you won’t pay a cent more for clicking on any of the affiliate links in this content.

Here’s a list of snowboarding boots that fit wide feet: 


1.Men’s Burton Photon BOA Wide Snowboard Boots Best Overall)


2.Men’s Burton Ruler Wide Boots  

3.Men’s Salomon Hi Fi Wide Feet Snowboard boots 

4.Thirtytwo TM-2 double BOA Wide Feet Snowboard Boots


5. Thirtytwo STW BOA Snowboard for Women with Wide Feet (Best Value)


The K2 2020 Maysis , Salomon Synpse JP wide, and Thirty Two men’s Lashed Bradshow and a few others are also good snowboard boots for folks with wider feet. But Lashed Bradshow is more like a standard width option. And no, the Salomon Synapse wide snowboard boots will likely squeeze your toes. They’re not as wide as everyone says they are.


5 Best Wide Feet Snowboarding Boots (Reviews&Buying Guide)


Each of these wide fitting snowboarding boots is a winning bet. Each choice should keep your feet warm and protected from powder, sleet, slush, and a whole lot more. Let’s dive in.


1.Men’s Burton Photon BOA Wide Snowboard Boot Review


The Burton Photon BOA wide boot has noticeably high-quality parts, and the construction quality speaks volumes. The price point is high, and that’s hardly surprising given the total value the boots deliver.

A stiff flex of 7 made possible by flex-sustaining power panels makes the boots responsive and aggressive. You’ll enjoy loads of control at high speeds and edge engagement is quick. These boots help you cruise way beyond warp speed. Strap them on and …fly.

Thanks to their Total Comfort Construction, the boots offer a broken-in feeling from day one of shredding in them. The PowerUp tongue offers a firm flex. This tongue, outer boot, liner, and outsoles together add up to a precise fit. No annoying slop of a shell that won’t match with the liner. Also, this special tongue features a dual-density material that enhances rebound while making these snowboard boots last longer.

There’s also the Griplite backstay that makes for a snug fit between the highback and the boots. This rubber backstay helps reduce boot weight, which ultimately means increased energy transfer to the binding and board. And don’t lighter snowboard boots mean less rider fatigue?


What Makes these Boots Comfortable?


The breathable and heat moldable Imprint 3 liner keep your feet warm. Woven from thermally activated carbon thread, the inner liner captures and reflects body heat inward. At the same time, this inner lining wicks moisture and sweat outward.

What’s more, the liner features the Aegis Antimicrobial Coating that suppresses bacteria growth, keeping odors at bay. And the snow-proof internal gusset keeps snow out.

The Focus cuff in conjunction with the inner lace lock and J-bar interface make for heaps of heelhold. These three amount to a solid heel hold system that snugly hugs the ankle while increasing response.

Then there’s the long-lasting and lightweight ESS Support shank underneath the Level 2 molded EVA footbed for shock absorption. And the EST optimized midsole gives a surf-like or skate-like boardfeel.

That’s not all. The lightweight 30-percent-recycled-material vibram EcoStep outsole with rubber spikes and ReBouce cushioning provides good grip and traction for safety. And the B3 Gel inserts dampen snowboarding impacts.

The BOA closure system is a dual-zone fit system that uses a knob or dial to create a custom fit. You can loosen the upper areas of the boot while tightening the lower sections. I like this zone-specific fit adjustability. Plus the liners are heat moldable, which makes creating a custom fit even easier.

Most important, the toe box is wide enough and the boots won’t painfully squeeze the wearer’s feet. They run wide, an ideal bet for wide footed snowboarders, and they’re available in 4 colorways.


  • Great heelhold
  • Wide fitting and easy to break in
  • Provides some arch support
  • Stiff flex for max support
  • Zone-specific fit adjustability
  • Outsole with rubber spikes offers great grip
  • Made by a U.S. company with a rock-solid reputation


  • Pricey


Verdict: These aren’t budget snowboard boots, but you’ll love your purchase. They look nice and are durable, plus you can adjust fit on the fly.


2. Burton Ruler Wide Boots Review


The Burton is similar to the Photon above, but it has a slightly softer flex, and its liner seems like lower quality. Plus it uses speed lacing instead of BOA.

With a medium flex, the Burton Ruler wide boot represents the perfect balance between comfort and support. Made of synthetic leather, it’s a versatile all-mountain option that provides extra forefoot room, more wiggle room. The heel features a harness that provide a solid heel-hold.

The boot’s speed lacing system with New England natural fiber ropes with a lifetime warranty has you spending less time lacing up and more time perfecting your turns and tricks. This lacing system allows for zonal fitting, and you can make fit adjustments with a cold, gloved hand.

Also, the heat moldable and removable Man Fur Imprint 2 liners and 3M Thinsulate strive to keep your feet warm and dry no matter how nasty the winter weather gets. And the gusset locks out the snow.

Breaking in the boot feels somewhat easier than other boots I’ve tested. I attribute that to Burton’s Total Comfort Construction. And the Shrinkage Footprint Reduction Technology reduces the boot’s overall footprint by a full size without reducing much-needed space, meaning no more toe drag. The articulating cuff makes for easy forward motion without shell distortion.

The B3 Gel low-profile midsoles absorb impacts well and don’t harden up in extremely cold temperatures. This center of gravity-lowering midsole eliminates the high-traction outsole’s ramp angle, making for increased boardfeel. It’s available in black and multiple sizes.


  • Wider forefoot and toe box
  • Speed laces for more convenience
  • Heat moldable for easy fit customization
  • Offers a shrunk footprint without reducing space
  • An internal gusset for warm comfort
  • Articulated cuff


  • Price point not bargain-basement
  • Synthetic leather not super durable

Overall, the Burton Ruler is a good boot ideal for freeride, freestyle, and all-mountain riding.


3. Men’s Salomon Snowboards Hi Fi Snowboard Boot Review


If you’re into the knee-breaking stunts Bode Meril favors, chose the relatively expensive Salomon Snowboards Hi Fi boot. Salomon’s Springback Spine consistently delivers a medium boot flex of 4, which gives the boots a right-out-of-the-box broken-in feel. This flex shines at conquering the biggest gaps while also dominating the less challenging shreds, helping you own the mountain.

With the Zonelock speed lacing, lacing up is fuss-free. This lacing system supports separate fitting of the upper and lower areas of the boot. I tighten the boots with my gloves on, and in no time.

Precision engineering positions every part accurately, including the unique EVA foam padding. This padding absorbs vibrations as does the lightweight, traction-packed HiFive EC+ outsole. And the watertight neoprene layer on the lower portion (functions as the gaiter) of the Salomon Hi-Fi superbly distributes edge pressure, promoting comfort.

Its Othorlite C3 footbed provides support and cushy comfort, and the bake-able liner keeps the inner environment warm. Baking the heat moldable liner opens up space so ample feet can fit comfortably. The toe box (with a toe cap) and heel add up to a wider fit, and multiple diamond holes all over the boot boost breathability. It’s sold in black or black/deep blue, and


  • Thermo-moldable liner
  • Speed lacing
  • Broken-in feel
  • Light and comfortable
  • Durable


  • Premium pricing
  • Limited color options


Overall, these premium quality boots should last several winter seasons. Note: the boot’s described as having standard width, but the toe area does come roomier than similar sizes from competing models.

4. Thirtytwo TM-2 double BOA Wide Feet Snowboard Boot Review


With a flex of 7, the nice-looking, modern Thirty Two TM-2 BOA is quite stiff, but it’s surprisingly comfortable. At that flex rating, pretty much all riding styles will submit to you: urban shredding in snowy cities, park snowboarding, backcountry riding, and all-mountain fun.

These are all-purpose all-mountain boots built for maximum support and control. The articulating cuff and performance backstay sustain a relatively high flex s you can conquer the slopes. And the high-performance heat-moldable liner is supportive and warm. Additionally, the performance liner features an internal harness that gives you tons of heel hold. The harness cradles the heel snugly so you can unleash all your riding potential without worry. But the tongue feels a little too stiff, which is nothing unusual at that flex rating.

The rubber outsole features somewhat pronounced lugs that generate heaps of traction, making hiking and snowboarding safe. It’s a 1:1 true fit outsole, which means the boot’s half sizes are precisely that — half sizes.

The double BOA allows the user to micro-adjust fit. Several sizes are available, and the boot comes in 3 color options namely black, green, and red/black.


  • Double BOA lacing system
  • Durable rubber outsole
  • Heat moldable liner
  • Wide fitting boots for wide feet
  • 3 color options
  • Pretty affordable
  • Good heel-hold


  • The tongue feels a bit stiff


Overall, the Thirtytwo TM-2 Double BOA Wide is a well-made boot that’s wide where you’d like it to be – at the heel and forefoot. With one-handed lacing up and supportive traction, there’s nothing like an inaccessible snowy trail for these nimble boots.


5.Thirtytwo STW BOA Snowboard for Women with Wide Feet Review


Thirtytwo snowboard boots are roomy and easily fit fat feet, and the soft-flex Thirtytwo STW BOA snowboard boots are no exception. My sister owns a pair of these, and they fit her chunky calves comfortably. .

Also, these boots with overmold protection run too small. My sister had to return them and bought a pair that’s two sizes bigger. Yea, they fit wide, but just because the producer uses a 1:1 last doesn’t mean they’re true to size.

But the heat-activated comfort liner with dual-density intuition foam opens up more room when you bake it. And that helps. The liner is anatomically designed to provide sufficient heel-hold, but while the outsole provides good support and traction, it’s not rubber. Instead, it’s foam, and flex retention isn’t anything amazing

With these, you’re standing on cushy, supportive foam that offers great shock absorption. Loops on the back of the boots make slipping them on and off easy. And the single BOA closure pulls helps create a snug fit. The 3D molded tongue provides support while helping tweak fitting until the boots fit like a glove. But don’t expect the micro-adjustable dial precision fitting you’d get with a double or triple BOA lacing system.


  • Convenient BOA Coiler lacing system
  • Great price point
  • Effortless dialed-in fit
  • Fits wide, fat fit well*


  • Rubber made of foam, not rubber
  • Run too small


Make sure to size up when buying the Thirtytwo STW women’s snowboard boots — they run pretty small. And if you have extra wide feet, order two sizes up.

Overall, these wide feet snowboard boots for young and grown girls are comfy, and the BOA closure doesn’t disappoint. At that price point, you’re getting premium features typically seen in higher-end boots.

With these, beginner snowboarders face no hurdles while trying to get comfortable on their snowboard. Similarly, advanced riders gunning for endless park mischief have a great companion. You may want to read best snowboard boots for beginners as well.

Buying Guide for Wide Width Snowboarding boots


In this wide feet snowboard boots buying guide, I point out the aspects you should keep in mind during the shopping process. Good roomy snowboard boots aren’t cheap, and you don’t want to end with boots that’ll lie around the house, unworn. But before we discuss what factors to consider, answer me: do you actually have wide feet? Let’s find out.

How to Determine If You Have Wide Feet


The best way to determine if you have wide feet is to trace the outer edges of your feet and compare the readings you get with an accurate width size chart.

Step 1


Find two pieces of plain white paper and lay them on the floor, side by side (See image below).


wide width snowboard boots
Image Credit: Shauna Hundeby/Demand Media. Each foot stands on a piece of white paper

Step 2


Trace the outer edges of the left foot (as someone to help measure your feet) using a pencil or pen. Repeat the foot length and width measuring process with the right foot. See how to do that in the image below:

wide boots for snowboarding
Image Credit: Shauna Hundeby/Demand. Wear the socks you’ll wear with your snowboard boots

Step 3


Use your ruler or tape measure to determine your feet’s length and width. To measure the length, start from the largest toe all the way to the heel. And to determine how wide your feet are, place the tape over the widest part of the foot. See how to take length and width foot measurements below:

determine if you have wide feet
Image credit: Shauna Hundeby/Demand Media. Measure your foot’s width across the widest part.

Final Step


Record the width measurement down and less 1/8 of an inch from the greater reading (your feet aren’t exactly equal). Then, using an appropriate size chart from the manufacturer you’re interested in, find your actual shoe size and move your eyes across the sizing row until you find your current foot reading. Then, move your eyes up and see what fit that measurement corresponds to.

Here’s an example width sizing chart (for regular shoes though,  but it applies to snowboard boots as well):


measuring foot width


Remember: Each snowboard boot brand develops its own size chart, and a wide fitting in a particular model from a certain brand may not fit you the same as a similar size from a different brand. For that reason, ALWAYS compare your feet’s measurements with an appropriate, brand and boot model-specific size chart.

Note: Sizing snowboard boots is pretty much like sizing dress shoes or skateboarding shoes. But getting the sizing wrong with these boots causes you way more trouble than you’d get with a regular skate or dress shoe.

Wearing poorly fitting snowboard boots is the surest way to get blisters, and you may end up hating snowboarding altogether. Additionally, snowboarding in ill-fitting boots can cause feet problems. Moreover, your days in the trails, groomers, snow parks, and mountains will feel long, unpleasant, and painfully memorable.


How to Know Your Snowboards Fit Properly


Look at the images below to get an idea of what a good snowboarding boot fit looks (and feels) like:

How to know your snowboard boots fit
Image Credit: The House. Your snowboard boots should fit snugly, not too sloppy that there’s zero heel hold or too tight that they squeeze your feet into sausages!

Get on a pair of suitable cold weather socks and put on your snowboard boots. Stand straight and “listen” to how the overall fit feels. The toes shouldn’t feel pinched, nor should they freely more forward or backward.

Also, if you try to initiate a toe-edge turn by leaning forward a little and the heels rise off the bottom of your boots, the boots are too large (or too wide). That’s called heel lift, and it’s largely undesirable while riding a snowboard.

And if the heel lift is significant, chances are you won’t have adequate feet and ankle protection; you might even get ankle injuries. Also, heel lift interferes with turning, jibbing, and landing tricks. So, get your snowboard boot sizing.


Why Do Feet Become Wide?


When it comes to why some snowboarders have wider feet than their peers, quite a few factors are the culprit. For some snowboard riders, genes are to blame. For example, if you have flat arches, you most likely have wide feet.

For others, consistently wearing ill-fitting shoes is the main cause of the problem. Also, having a health situation such as edema can cause one’s feet to widen a tad according to NHS. Edema causes feet swelling, and aren’t swollen feet naturally beefier and wider than healthy ones?

Similarly, if you have gained weight substantially, your feet may have grown more massive so they can adequately support your larger frame.

So do what you can do to slim your feet, or consult a foot doctor where necessary. Good news is you can always choose snowboard boots with a wide feet and solve the problem even as you apply other solutions and therapies.

Factors to Consider When Buying Wide Width snowboard Boots


It turns out there’s quite a few factors to keep an eye on when buying wide fitting snowboarding boots. I list these considerations and discuss them below.


1.Fit and Comfort of the Boots


I dealt with fit above. I insist you must choose well-fitting snowboard boots if you want to enjoy your life on the snow more. While you can always return ill-fitting boots, the process can sometimes be too much of a hassle and other times obscenely expensive. Boots that fit right feel comfy and have you wanting to shred more often.


2.Snowboard Boot Flex


Ah, snowboard boot flex. When it comes to shopping for a snowboarding boot, there’s a number you should keep your eyes peeled for: boot flex rating.

Boot flex rating is a number that expresses the softness or stiffness of snowboard boots. Flex rating is a scale ranging from 1 to 10. A rating of 1 means the boot has super soft flex, and a flex rating of 10 tells you the boot you’re looking at has extremely stiff flex.


Match Boot Flex with Your Snowboarding Style


So, what’s considered ideal boot flex? The right flex for you depends on your snowboarding style.


Soft-flex Snowboard Boots


Generally, soft-flex snowboard boots are most suitable for freestyle riding and all-mountain riding. Soft flex snowboarding boots are pretty forgiving and offers heaps of maneuverability. Forgiving and easy-to-maneuver boots are awesome when you need to stomp landings, jib handrails, or butter boxes. Beginner snowboarders and park riders tend to favor soft flex boots.


Stiff Flex Boots for Snowboarding


A stiff flex boot is most ideal for the freeriding style of snowboarding. Stiff flex boots offer tons of response and support, the perfect boot for advanced snowboarders, backcountry freeride snowboarders, and all-mountain riders who need a little more support and responsiveness.

Boots with lots of stiff flex are designed to give the rider heaps of edge power. And you do need enough edge power if control and precision turning are critical to you.


3. Heel-hold


No matter your riding skill level, you want good heel-hold while shredding. If you’re wide footed, choose a boot that’s roomy enough at the heel but not too roomy that you have heel lift. Similarly, stay away from options with a constricting heel that causes blisters or generally hurts your feet. If your boots allow unhindered forward flex for easy toeside turns, you huuuui huave an optimized foothold.


4. Boot Inner Liners


Typically made of lightweight, moldable material known as Ethylene Vinyl Acetate (EVA), the liner is the inner boot and can be removable or may come attached to the outer boot. Removable liners allow you to do speed drying when you need to and are easier to clean. Good boot liners boost cushioning, stability, and insulation so you can have all-day comfort in the mountain every season.

Budget snowboard boots usually offer stock liners that provide basic padding and stability. Eventually, stock liners conform to the shape of the feet. Moldable liners are sort of an upgrade from stock liners and are designed to mold to the wearer’s foot shape down the road due to body heat.

And fully heat moldable liners let you create a custom fit through baking the boot liners at home (if you know what you’re doing!). Better to have a boot shop with the know-how and proper heat molding equipment do it. Wide fitting snowboard boots with heat moldable liners can be quite pricey.


5. Wear the Right Socks


Good socks keep your feet dry and warm while wicking away moisture. Merino wool socks as well as those made of synthetic materials are the best insulators around. Stay away from cotton socks as they suck at wicking away moisture and sweat.

Thin or thick socks? Go with thin whether your feet are wide or not. Thin socks give you a keener feel for the snow. And while thin socks may not offer as much insulation as thicker ones, the outer shell and inner foam offer adequate insulation against the weather elements. Oh, and don’t wear two layers of socks, one is enough.


5. Boot Lacing Systems


Wide width snowboard boots with traditional lacing system rely on standard laces to achieve a good fit. Traditional lacing is easy to use and unlike BOA or speed lacing closure types, you won’t worry about something breaking or malfunctioning. But you can’t tie your laces with a gloves on while boarding.

Then there’s quick-pull lacing that you can operate with gloves on. Quick-pull lacing systems have you tug on strings, tightening or loosening the upper and lower zones of the boot separately. These lacing systems are super convenient and fast, but they’re prone to breaking or getting worn.

Finally, there’s the BOA lacing system that uses steel cables to secure the boot on your feet. A single BOA closure system doesn’t allow zonal/separate tightening or loosening of fit while a double BOA system allows you to fit the upper and lower zones differently.

Triple BOA closures give you even more control. You can separately fit the upper and lower portions as well as the boot liner.  BOA, like quick-pull lacing, allows micro adjustments and you can operate the technology with gloves on. But having this feature can significantly increase the price point.


6.The Boot’s Footbed


Good supportive footbeds help to distribute pressure evenly over the rider’s feet and also help reduce pain in the balls of the feet as well as arch fatigue while also correcting slow turn response. Such insoles ensure you power your edges accurately by applying pressure consistently during turns.

Most snowboard boots come with trim-to-fit stock footbeds that have heat-sensitive foam. This heat-responsive foam molds to the shape of your feet with repeated use. But the best you can expect from stock insoles is a semi-custom fit.

You can easily use your old insoles to trim and fit new ones. And those insoles should hold your feet in such a way that they’re neither pronated (where your ankles roll in) nor supinated (where the ankles roll out). Additionally, they should provide enough stability.

But if you have high arches or extremely low arches or have pronounced pronation issues, have a boot fitter make a custom footbed for you. But custom insoles aren’t cheap, and the costs increase significantly if you want the fitter to design fully custom footbeds with a custom heat moldable base. Boot fitters charge anywhere between $75 to $500 depending on how much work your feet demand.


7. Outsoles: What Material Are They?


The best snowboard boots for wide footed snowboarders feature rubber outsoles. Not only do rubber soles offer better traction, support, and protection but also  offer more flexibility and outlast other types of materials.

A friend with wide feet the other day bought a pair of snowboard boots. In the picture, the boots looked high-quality and well-made, but upon receiving the product, the outsole was all foam and offered much less traction and protection than he’d hoped.


8.Don’t Ignore Anatomical Differences


Men’s snowboarding boots are designed with a little bit more room around the toe, midfoot, and heel area. Snowboard boot manufacturers are aware of the anatomical differences between men’s feet and women’s, and they factor that knowledge into the overall boot design. It doesn’t you can’t wear men’s boots if you want to, though, but go a size and half down as you’d do with regular shoes.

9.Best Price for Wide Width Snowboard Boots


If you don’t mind grabbing offseason deals, you can end up paying up to 50% off. If you choose this route, be ready for boots released 1 or 2 years ago.

You can also pick up great deals at swap meets in the mountain around October and November. At this time, snowboard shops and shredders typically dispose of any extra snowboarding gear they may have. So take advantage of this and save a dollar or two.

And of course, there’s always a good deal for anyone who shops online at Amazon or wherever. If you want decent to good shredding boots, you shouldn’t have issues shelling out $150-$250. And if you’re the guy and gal that must have the best of the best, it’s more like $350 to $500 or even more.

Best Snowboard Boots for Wide Feet: Final Verdict


The Men’s Burton Photon came out on top in the race for the best wide feet snowboard boot title. Made mainly high-quality leather and outsoles with rubber spikes, these boots last. And having a properly functioning BOA lacing system that lets you adjust different portions of the boot individually makes creating a custom fit pretty easy.

The inner boot liner keeps the feet warm even if you’re shredding in below zero temperatures. Also, heel-hold is really good. Additionally, there’s a gusset that shuts out snow. But it now on Amazon if you’re ready.

How to Bake Snowboard Boots

Some of the best snowboard boots on the market feature heat moldable liners that need to be baked in an oven for a custom fit. While you can bake your snowboard, ski boots, or snowmobile boots at home, understand that it’s easy to do it wrong and damage them. Boots are expensive, and no one likes tossing money down the drain when they can avoid it.

To avoid damaging otherwise perfect boots, either learn how to custom mold your boots at home, or pony up for an expensive boot fitter at your local ski shop. In this article, I handhold you through the snowboard boots liner molding process. Hopefully, I’ll save you money in the process.

But first things first…


Are Your Boots Heat Moldable?

But then there’s that powerful snowboard boot that just shipped in from Amazon or wherever. And the snowboard boot liners need to be heat molded. Now, it’s OK to bake such boot liners. What isn’t ok is mismanaging the process and ending up with useless liners. Be sure to check if your boots are heat moldable before you shove them into that little kiln. Product descriptions at Amazon normally state whether the boot you’re looking can be custom molded.


Why Heat Mold Your Boots in the Oven?


People bake all kinds of shoes in the oven, but why do they do that? Usually, the main reason is to eliminate the often tough break-in process. Avoid baking shoes unless the manufacturers says you can or should. How do you break in snowboard boots? Listen, friend: break in your shoes the hard way, like you’ve always done. I mean, hasn’t breaking in shoes always been a sweat, blood, and tears kinda thing?


Baking Snowboard Boots Compacts Them


Another big reason to bake boot liners in a home oven or snowboard boot-specific oven down at the snowboard store is fit customization.

When you custom mold boots, that makes roomier, and fit improves noticeably. It’s like broiling boots in a convection oven compacts the areas inside the boot liner, creating more room.

I once bought a pair of thermal-moldable boots from Burton, and while it fit ok, the toe box didn’t give my toes enough wiggle room. Afterwards, the shoes expanded a bit. and I toe circulation improved dramatically. Evidently, custom molding snowboarding boots helps.


Can I Mold Old Snowboard Boots?


You can, technically, but you probably shouldn’t. I once tried heat molding a pair of liners that still felt uncomfortable 2 years after I’d broken them in, and what happened? I ended up with much weaker liners that had me splurge on an option that not only fit well but also pampered my feet. I still have those terrific kicks, because Burton offers built-to-last boot models for skiing and snowboarding.

If you’ve been abusing your boots for 5+ years,I recommend that you show yourself some love and order a brand spanking new pair of the sickest kicks in your range.


What to Do Before Broiling Your Snowboard Boots


Baking boots isn’t some magic wand that resolves all fit issues. In fact, this heat treatment can end up worsening fit. Before you put your boots inside the microwave, make sure the liner and the outer shell have a perfect fit. The fit shouldn’t be too tight, nor should it be too loose. As you test to see whether the liners and the shell fit well, remember to include the specific footbeds or custom orthotics you’ll use.

If the inner and outer boot have a poor fit, DO NOT heat mold them, says Intuition Liners. If the heels or other areas are too loose, no amount of oven-baking will help improve fit.

But how do you know it’s a perfect fit? It’s easy. The toes fit in there nicely and comfortably. That means they don’t curl up or otherwise feel jammed into the end of the liner. But while the fit should be be snug rather than too sloppy or too tight, tight isn’t necessarily bad…

Remember: It’s easier to create more room than to shrink a boot.

How Do You Heat Mold Snowboard Boots in the Oven/Microwave?


Here’s how to custom mold your snowboard boots in the oven at home:

First off, collect the following items and resources before you embark on your little boot dry-roasting experiment.


You need:


(i) 3 to 4 lbs of uncooked rice. Not any rice, though. Make sure it’s short-grain rather than long-grain rice, uncooked. If you’re a size 9 or smaller, 3 lbs of rice should be enough. And if you’re bigger than size 9, have 4 lbs for the job. Intuition Liners say not to use instant rice.

(ii) Oven

(iii) A pair of stockings/tube socks

(iv) A rubber toe cap (Or use some duct tape to improvise)

(v) Cutting board

(vi) Some plywood (if your floor is something special)

(vii) Power supply


Different Methods to Heat Mold Shoes


There are different custom molding methods out there including using a dryer or heating the shoes directly in the oven. But I don’t want you to waste your money, which is why I’ve only described what I believe is the best method of custom mold boots. Follow the steps below to custom mold your snowboard boots:


Step 1


Put all the rice into one of the nylon stockings. Once done, make a sturdy knot on the opening.


Step 2


Place the stocking with the rice on a flat surface, maybe on a table or plywood. Work the rice until it’s spread evenly in the stocking. You should end up with a sausage-like or tubular form/shape.


Step 3


Take the sausage and put it in the microwave oven.

Step 4


Turn the power on and keep it that way for how long? What determines how long the baking process takes is the wattage of the oven as advised by the manufacturer. Don’t know the wattage of your oven? Check its back panel. and if you don’t see the wattage there, fetch the product’s user manual. Don’t have the user manual? Ask your fave search engine.

For most ovens, the wattage hovers between 800W and 3,000W. The higher the wattage, the faster and more evenly your boots cook. For 100W to 900W, cook for 7 minutes; between 1,000W and 1,100W, make it 5 minutes, and for 1,200W to 1250W, 4 minutes should be enough time.

And what’s the best temperature level to run your micro oven? 150, 200, 250, 300, 350 degree Fahrenheit? You’re going to get a different answer every time you ask this question, but it’s about time you got an accurate answer. I’ve seen once site say 350 degrees, and that’s too high. Most skiers and snowboarders who’ve always baked their boot will tell you that 200 degrees is adequate for pretty much any kind of boot. Wait until the timer turns off, until you hear that familiar ding sound.


Step 5


As the rice roasts, grab the the toe cap and fit it over the first foot.


Step 6


Take the free stocking and place the same over the fitted toe cap. Make sure to smooth out all the wrinkles /folds from the stocking,


Step 7


Once the timer goes off, hold the rice stocking by its knotted end and remove it from the microwave oven. It’s a little hot, take care, ok?


Step 8


Put the stocking with the rice inside the first boot, fitting one end into the toe box and the other into the heel. At this point, the footbed isn’t inside. Hold the boot and tap it as hard as you can on the floor, preferably over some plywood to avoid damaging the floor.

Tap the heel first and then toe box. Keep tapping, back and forth, until the stocking finally settles as deeply as it can into the liner. Afterward, let the rice remain in the boot for as long as recommended by the manufacturer. The duration typically ranges from 4 minutes to 12 minutes.

Be sure to check the manufacturer’s liner heating chart so you don’t over-heat the kicks. Here’s a heating chart for intuition liners so you can understand what I mean. The recommended heating period is a range with a 2 minute difference between the higher and lower number. If you want a really aggressive boot, go with the upper heating limit.


Step 9


At this point, slide inside of the heated liner (with the toecap) and stomp the hell out of the floor with the heel. Don’t stop until your heel and the liner around it lodges itself comfortably into the heel pocket. Then, lace up or fasten the buckles normally and stand with your knees somewhat bent for roughly 5-7 minutes. Be sure to keep your heel pressed down hard enough to avoid heel lift.


Step 10: Finally, remove the stocking (and rice) and repeat the exact same process for the other liner.


What’s the Cost of heat Molding Boots at a Ski Shop?


Cost varies from ski shop to ski shop, but most fitters charge in the $100 to $500 range depending on how involved the fitting process gets and whether they’ll add a custom insole for you. If you bought your boots from the shop, their people should advise you regarding the right model and size. More important, most ski shops do it for FREE for skiers and snowboarders who buy from them. Heck,some really nice ones do it for free even for folks who bought their boot online or wherever!


How to Custom Mold Snowboard Boots at Home: Final Word


Heat molding a boot is a great way to create a custom fit so you can enjoy more comfort and support while flying over the slopes. Now that your boots fit like a glove, get the board and bindings right. Then, head out into the season and experience the warmth and performance that all the custom fit, padding, ankles support, and snowproofness of the tongue deliver.

Best Beginner Snowboard Boots

Best beginner snowboard boots

The best beginner snowboard boots may not offer the fancy features pro-level snowboard boots provide. However, the market offers many decent beginner snowboard boots at that skill level. The finest beginner snowboarder boots keep your feet warm and dry, adequate ankle and calf support, and ample comfort. Additionally, the best beginner options are soft flex boots while others flex medium, and they won’t have you ponying up your entire life savings.

*Affiliate Links Disclosure.

This website participates in the Amazon Associates program. And as an Amazon Associate, I earn from qualifying purchases. However, you won’t pay a cent more for clicking on any of the affiliate links in this content

5 Best Snowboard Boots Ever (Reviews &

Buying Guide)


1.Burton Ruler BOA

2.Mens Vans Hi Standard OG LTF Mid Calf

best snowboard boots for beginner riders

3.Men’s Burton Moto Boa

best beginner snowboard boots

4.Men’s Vans Infuse

best beginner snowboard boots

5.Women’s K2 Sapera

Best snowboard boots for beginner

And now, the reviews.


1.Burton Ruler BOA Review


Made of recycled materials, this medium flex boot features a warmth-promoting multi-density textile/synthetic heat-moldable liner. The 3M Thinsulate insulation and sleeping bag-like reflective layer shield against snowy blasts.

The one-of-a-kind Dual Zone BOA fit system equipped with Coiler technology (backed by a life-time guarantee) coupled with Burton-exclusive New England Ropes powers upper and forefoot micro-adjustability. The disintegration-resisting PowerUp tongue with the unique internal gusset construction further improves fit and shuts out the harsh weather elements.

The durable, lightweight EVA footbed dampens shock no matter how forceful the landings, and the gravity-lowering EST midsole eliminates the ramp angle of the waterproof, anti-slip outsole, immensely enhancing boardfeel. Thanks to Burton’s Total Comfort Construction, there’s almost no break-in period. Additionally, Burton’s Shrinkage Footprint shrinks the product a full size, reducing toe drag.

This product is available in 5 colorways and multiple sizes, 6-12 with four half sizes. Zero fit issues.


  • Unique BOA closure supports micro-adjustability
  • Snowproof construction defends against the elements
  • Heat moldable liners for customized fitting
  • Fits like perfect gloves


  • Not a budget pick


The Burton Ruler BOA catapults beginners to pro-level snowboarding experience fast. Probably not the best pick for absolute beginners, but heavy beginners and intermediate level riders will love it. If you’re a lighter rider, I suggest you choose something else.

2.Mens Vans Hi Standard OG LTD Mid Calf Review


The mid-calf reaching Vans Hi Standard OG LTD amounts to a classic contemporary look. With Van’s iconic side stripe and anti-skid V1 waffle lug rubber outsole, it offers the familiarity of Van’s popular vulcanized skate shoes.

The single-density V1 POPCUSH footbed that features airflow perforations and a moisture-wicking Nylex topsheet dampens shocks. Van’s anatomically shaped molded 3D V1 Ultracush liner with a flex rating of 4-5 (the boots flex medium) enhances support, fit, and comfort, and the V1 ankle harness optimizes heel support. Also, heel hold is really good.

Calf support comes from the supple and elastic PLEASURECUFF. Traditional lacing with a powerstrap and three solidly attached hooks helps customize fit. Unfortunately, you can’t modify fit while riding. Sizes: 7-12 with 2 half sizes (7.5 &8.5).


  • A stylish, modern look
  • A well-made mid-range deal
  • Shock dampening footbed
  • Great comfort features
  • Really good heel hold
  • Stunning aesthetics


  • Price could be lower
  • Color limitation (black/white only)


Overall, it’s a worthy investment, a great all-mountain and terrain parks snowboarding option.


3.Men’s Burton Moto Boa Review


This boot’s PU backstay bolsters support while its soft-flex PowerUp tongue with internal gusset keeps the feet warm and dry even in slushy conditions. Its remarkably lightweight construction Dynolite outsole with aggressive lugs demonstrates great performance even in sub-zero temperatures.

The backed-by-a-lifetime-guarantee BOA Coiler closure makes getting the shoe on and off and adjusting fit during use easy. Further, the total comfort construction with fuzzy “man fur” makes break-in nearly effortless.

Tugging the cord on the integrated lacing liner tightens it while a knob-like ratchet customizes fit for the outer shell, and the extra padding on the rear keeps the heel locked in. Multiple sizing options and colors available.



  • Comfort Construction for pain-free break-in
  • BOA system with coiler tech
  • Toe box wider than most


  • Cheaper deals available
  • Runs slightly small


Bottom line: Great for beginner intermediate riders with moderately wide feet who ride narrow waist boards. Note: go up a half size.


4.Men’s Vans Infuse Review


This product’s heat-moldable liner is crazy comfy, and the V3 UltraCush footbed with FlashDry fabric from North Face absorbs impacts well. And, thanks to Van’s Flex Control System, you can tweak its flex/stiffness. The deal represents a high-end feel reflecting its steep price point.

The durable full-grain leather upper and aggressive waffle-style outsoles ensure there’s no nook or cranny you won’t explore. Whether you’re riding insanely rocky terrain, showing your snowboarding chops at a local resort, or splitboarding, these soles obey every command. Heel hold is terrific; you won’t experience slippage or blisters or whatever.

Its BOA system aided by traditional lacing delivers a snug fit that feels safe enough for trudging uphill. But when going downhill, loosen the BOA a bit. The Powercuff strap provides peerless heel hold. However, getting the boots on and off isn’t hassle-free.

But they run a half size small and somewhat narrow — go up a half size. Also, tightening the shoe around my shin proved challenging.


  • Amazing heel hold
  • Flex adjustability
  • Unmatched all-terrain traction
  • Great heel hold


  • Expensive
  • Runs narrow


Overall, it’s worth it.


5.Women’s K2 Sapera Review


With a sleek silhouette, the medium-flexing K2 Sapera is among the best snowboard under $200. Its 3D Intuition foam liner features a speed lacing system that cooperates with the BOA Coiler closure system for a solidly snug fit.

Molded 3D EVA insoles provide structured comfort, and the internal and external J bars enhance ankle support and optimize heel hold. Tightening the mixed lacing system causes boot-wide instead of sectional adjustments, though.

Getting in and out is easy, so is adjusting fit during use. However, flex retention isn’t perfect, and the foot print could be reduced.

Its durable, lightweight vibration-dampening Phy-light outsole rivals any good rubber sole and delivers impressive shock absorption. Traction isn’t exceptional, though, and response is decent with easy-to-medium turning snowboards. After cranking down the BOA, I get amazing heel hold.


  • Affordable with great heel hold
  • Easy to slide into and out of
  • BOA lacing system for perfect custom fit
  • Versatile: works for varying terrains


  • No footprint reduction technology
  • Adjustability not great
  • Flex retention not awesome


It’s certainly not the best beginner snowboard, but you’ll get exceptional heel hold for safe, secure rides. Grab a pair and start practicing those backside moves or whatever.

Best beginner snowboard boots Buying Guide


Snowboarding is doubtless a high-impact sport, and a whole ton of strong forces are at play the whole time. It’s easy to break things, usually ankles. Anyone who’s tried turning in boots that weren’t rigid enough knows how easy it is to twist one’s ankles.

This guide should help you pick up a pair of snowboard boots that’s designed and optimized for performance, warmth, comfort, and protection. Keep these considerations in mind during the shopping process:


1.What Boot Flex Level Do You Like Best?


Each snowboard boot on the market sits somewhere on the softness/stiffness continuum. Some boots are considerably soft while others are quite stiff, and the degree of stiffness you should go with should be a function of where and how you ride.

Three softness/stiffness levels exist, and these include soft flex, medium flex, and stiff flex.

A Soft Flexing Boot


Snowboard boots that flex soft are normally crafted from materials and components that have tons of resilience built into them. These materials are also comfort-focused, making this type of snowboarding boot super comfortable the entire time you’re cruising around in the mountain. These are the best option for you if you prefer boots that are pretty easy on your feet.


Medium Flex Boots


medium flex snowboard boots represent a really nice balance between comfort and support. Think of this type of snowboarding boot as a hybrid running shoe that delivers flex-oriented road runners as well as comfort and stability-minded trail and mountain runners. With a medium-flex option, you get unconstrained mobility as you gallop in the mountain while your feet stay warm, dry, and comfortable.


Stiff Flex Snowboard Boots


When riding your snowboard at breakneck speed in extreme snow conditions, you need boots with a very high amount of stiffness. Only boots with stiff-flex construction can withstand the rigors of intense snowboarding. Stiff-flex snowboard boots are designed to provide an insanely high level of support and edge power.

So, soft-flex vs medium flex vs stiff-flex snowboard boots, what’s the best option? There’s no better flex level. What works best for one snowboarder may not be a great fit for another. In the end, it’s a matter of personal preference.

So, pay attention to each pair’s flex rating as it determines the overall feel of the boot during use.


2.Your Snowboard Riding Style


Your specific riding style is another critical consideration when shopping for a suitable snowboarding boot. A freerider may need a different boot style than an all-mountain snowboarder, and a free-style snowboard rider often needs a slightly different kind of boot than either a freeride enthusiast or an all-mountain rider.

What are the best snowboarding boots for beginners, all-mountain riders, and backcountry splitboarders? Generally, all-mountain and beginner snowboarders who ride groomed runs, untracked powder, and park-and-pipe tend to prefer soft flex or medium flex boots.The same goes for backcountry splitboarders. However, all-mountain racers need stiff boots.

What about freeriders (also known as big mountain snowboarders), that happy bunch of writers that conquers untracked backcountry and groomed runs? This category of riders typically use a bit stiffer snowboarding boots since this snowboard riding style fundamentally focuses on speed and precision.

And what do freestyle snowboarding and park riding enthusiasts, a group of snowboarders who are more about fun than anything else, want most from their boots? These riders are always doing jumps, spins, riding rails, half-pipe riding, and a whole slew of other tricks. That’s why they need soft quick-response boots designed for all kinds of maneuvers.

Regardless what style of riding you’re into, be sure to check the flex rating of the snowboarding gear recommendations presented in beginner snowboard reviews.

Speaking of style….

Snowboard Boots vs Snowmobile Boots


Can I use my snowmobile boots to snowboard? Yes, you can, technically. Even though snowmobile boots and snowboards look pretty similar, they’re different and are built for different purposes. First off, snowboard boots are noticeably stiffer than snowmobile boots besides being more lightweight and flexible.

Both boots are are thick enough and will keep your feet warm while sledding or boarding in the snow, but most snowboarders will agree that snowboarding boots work better than snowmobile boots when it comes to riding a board.


3.Are the Boots Comfortable and Do They Fit Right?


Snowboarding may be a high-impact activity, but it doesn’t mean comfort isn’t important in this snow sport. The best boots for snowboarding for beginner snowboarders and pros feel comfortable and fit right.

Yes, I’ve heard lots of snowboarders say that good (read stiff) snowboard boots aren’t like super comfortable. And I agree with some extent. Here’s the thing: no pair of stiff boots feels comfortable before the wearer has broken them in.

But once you break your womens snowboard boot or your snowboard boot mens version, you’ll love how comfortably rigid your pair feels. Generally though, the more rigid, the more support and the less comfort.


Snowboard boot Fitting


So, how do you size your snowboard boots? How do you know your boots for snowboarding fit right? If you’ve sized your boots for snowboard riding properly, they feel neither ultra-tight nor too loose. Instead, well-fitting boots give the wearer a pretty snug fit.

If your boots are too tight, they’ll end up constricting circulation, and that’s not nice. And if they’re a little too loose, your feet keep sliding around the inside of the boots, compromising stability, comfort, and support. let me say this again just in case you didn’t get it: ONLY boots that fit snugly can be considered a good fit regardless of your snowboarding style.


Snowboard Boots Fitting Works Like Standard Shoe Fitting


Snowboarding boots fit pretty much the same way regular dress shoe or skateboarding shoes do. With most snowboard boot models, you shouldn’t encounter fit issues if you order your regular size. But even though snowboard boot sizing works similar to standard shoe sizing, you may notice small fit differences between brands and even between boot models across a given brand.


How to Buy Good Kid’s Snowmobile Boots


And when buying a snowboard boot for a little loved one, resist the temptation to buy a size bigger reasoning your child needs something they’ll “grow into.” Instead, buy the correct size for their feet. But who wants to splurge on children’s snowboard boots all the time? No one, that’s who.

To address the fast growing kids’ feet problem, choose boots that come with special footbeds, those that let you to peel away layers to create more room for your child’s growing feet.


How to Buy Good Kid’s Snowmobile Boots


And when choosing the best womens snowboard boots, be sure to select options designed with women’s anatomical needs in mind. Such boots generally feature narrower heel cups that securely hold women’s narrow heels. Women naturally have narrower heels than men.


Best Time to Fit Snowboard Boots


Supporting your local snowboard boot shop is a good idea, and I encourage it. It’s hard to size your boots wrong if you walk into a local shop and try on a few options for fit. But when is the best time to fit your beginner snowboard boots? For some reason, your feet aren’t always the exact same size; size varies with the time of day.

Shoe and boot sizing experts agree that the most ideal time to try on a new pair of shoes for fit is in the afternoon or evening. Why? it’s because feet normally have swollen or expanded to the max by that time.

Also, be sure to wear thin socks (synthetic socks or merino snowboard socks) when fitting the boots you’re eyeing. Thin socks are preferable because they’re designed to curb friction during use as well to minimize hot spots.


4.What Lacing System Does the Snowboard Boot Use?


Another critical aspect to keep an eye is the closure types or lacing systems the boot you’re looking at relies on to hold your feet firmly secure as you fly all over the snowy mountain. Three closure systems help both the beginner rider and the pro achieve a snugly secure fit. These systems include the BOA closure system, traditional lacing, and quick-pull systems.

Most of the best snowboard boots I’ve seen (and worn) over the years feature BOA lacing/BOA closure system. Others use traditional lacing, and there’s also a whole ton of beginner snowboard boots out there that boast quick pull laces. Let’s look at each closure system.

  • BOA System
  • Quick-pull lacing
  • Traditional Laces

Traditional Lacing


With this type of closure, you get to achieve a customized tight-enough by hand. Boots with kind of lacing tend to cost less than others, and while lacing up may take a minute longer than quick-pull lacing or BOA lacing, it’s hard not to get the right fit.

The downside with traditional lacing is that laces can loosen without warning during rides or jumps. And, it’s not easy to lace up while riding, and that’s especially so if your hands are cold (and they always are). Also, if you’re wearing snowboarding gloves, which is always the case, tightening laces can be challenging. It’s best to use large, thick laces. You can easily find replacement laces.


Quick Pull Laces


Some of the best beginner snowboard boots on the market use this fit-tightening technology. With a single pull, you can quickly create a snug fit. And the best part? You can do zonal fit customization. I mean, you can tighten specific areas more you do others. For example, you can further tighten foot lacing while leaving the tightness of the heel and ankle area intact. What’s more, you can tighten or loosen these speed laces with a cold, shaking hand during a riding session.

One gripe riders of all experience levels have is that with this closure type, pull laces can loosen when you least expect it. It’s also not uncommon for this system to create pressure points inside the boot. Some riders say they can’t seem to achieve a tight enough fit with this closure type.


BOA Lace System


A BOA lacing system is a one-handed dial-based closure that pulls cables, letting you quickly customize fit. Unlike a quick-pull closure type, you usually can’t create area-specific fitting. But you can adjust fit mid-action using one hand, even if your hand is cold, shaky, and gloved. However, this lace system can bump up pricing considerably.

Some options also feature a power strap, and most closure systems are often a hybrid design consisting of usually two different closure types. A power strap enables you to lock in your heels so you can ride securely and safely and comfortably.


Heel Lift Sucks


Regardless what closure type you favor, be sure to achieve a snug fit before strapping and heading out to the snow. Never wear boots that won’t give you a super snug fit around the heel. Why? It’s because the heel area is the pivot point where the board gets levered onto its edge.

With a precise fitting around the heel, you won’t experience heel-lift. Heel lift is when your heels rather than your snowboard lifts when the rider leans forward. If performance-oriented snowboarders hate one and only one thing, that has to be heel lift.


5.Snowboard Boot Liners and Footbeds


The boot liner is essentially EVA foam. EVA is an abbreviation for Ethylene Vinyl Acetate, a lightweight material produced from moldable polymer. EVA foam looks pretty much like foam rubber, and it’s incorporate into a snowboard to boost insulation, cushioning, and stability. I prefer a boot with removable inner boot (liner) as it’s easier to clean. Besides, it airs out faster than nonremovable boot liners after cleaning.

Snowboard boots come with one of these liner types: custom moldable liners (heat moldable liners), thermoformable (also heat moldable), and stock liners (nonmoldable liners).


Custom Moldable Boot Liners


With these liners, you use an external source of heat to make the liner comfort to your foot shape. But you can heat mold your boots at home. Alternatively, you can ask the folks at my local ski shop to help you with the heat molding process.


How to Heat Mold Snowboard Boot Liners


You can custom mold your boot’s liners at home, but beginner snowboards are always doing it wrong. If you hate the idea of ponying up for a fitter at your local ski shop, do the following. Buy your boots from a ski shop. If you do, they’ll most likely help with custom molding them for you. That option eliminates the possibility you’ll bake the liners incorrectly.

What if you want to buy your snowboard boots at Amazon? No worries. I’ve put together a short post that should help you custom mold your boots at home without worries.


Thermoformable Liners


With these liners, the snowboarders uses natural heat from their feet to create a custom heat.


Stock Liners


As the name suggests, stock snowboard liners are standard liners designed to provide general padding and stability to the wearer’s feet. But unlike thermoformable and custom moldable options, generic/stock liners are very pliable. Pressure exerted by the feet rather than heat eventually causes the inner boot’s forefoot to have a shape that aligns with that of the foot.


6.Boot/Board Size Compatibility


Now that you’ve decided on a particular boot to buy, it’s time to match boot size with board size. If there’s a mismatch between board size and boot size, you won’t have much board control, and board control matters a lot when you’re levering your snowboard edge to edge.

If your snowboard’s width is too large compared to your boot size, you’ll have considerably less board control while riding in the mountain. And if your board is too narrow compared to your boot size, you’ll experience toe drag and heel drag. Here’s the thing; heel drag and toe translate into reduce edge control, and edge control is supremely important during turns.


7.Price Point and Brand


You can buy your snowboard boots anywhere you choose. However, not every snowboard boot brand is known for superior quality. Some brands from a certain country (I won’t mention names here haha) whip up tons of crap and give it nice-sounding product names, but crap is just what it is.

Some unfortunate snowboarders have bought these cheopo boots only to shed frustrated tears after their purchase feel apart on day of their mountain vacation. Vans, Adidas, Burton, Thirtytwo, Salomon, DC Phase, Head, and K2 Maysis are some of finest snowboard boot brands out there. I’ve heard only good things about the Salomon Faction, but you can expect high-quality boots from any of these snowboarding gear companies.

But what’s the considered a reasonable price point for decent beginner snowboard boots? If there’s one thing among the three Bs for a complete snowboarding setup (boots, boards, and bindings) you should be willing to splurge on, it’s boots.

Decent beginner snowboard boots cost in the $150 neigborhood. But if you want better boots that offer a little more of everything, be ready to fork over at least $200. Past $200, the boots offer fancy additional features, most of which beginner riders may not need.

Best Beginner Snowboard Boots: Verdict


Of the 5 best beginner snowboard boots I reviewed, the Burton Ruler BOA emerged as the top pick. But the rest are also great and should work perfectly for beginner stage snowboarders.

The shoe’s BOA closure and the weather-proof PowerUp tongue help you set up a custom fit. And the 3M insulation shuts out frost and every other kind of snowy nastiness out of your beginner feet. Also, the anti-slip rubber outsole, the EST midsole, and cushy EVA footbed handle impact absorption really well. Thanks to its footprint reduction technology, you’ll experience much less toe drag.

These aren’t the best beginner snowboard boots for complete beginners. Rather, they’re the best beginner snowboard boots for heavier beginners with a little experience under their belt. If you’re lighter, I recommend the Vans Hi Standard OG LTD.